Subject: JAG California CGN 36 and Sumner FRAM Date: Mon, 20 Aug 2001 22:08:12 -0400 From: "Michael Taylor" To: "Cadman" Hi Tim, Built these along with their Hamilton and Hamilton FRAM this weekend. Here's a quick review. California. One piece hull and superstructures, resin SPG radars, weapons, and ships boats. Photo etched SPS radars, boat davits etc. Another excellent offering from JAG. Flash is thin to transparency on the smaller cast pieces. Other pieces are cast on a thin wafer. I built this kit in 2 hours-then painted it. Comprehensive decals for weapons areas and helicopter deck. Add some photo etched rails if you like and that's it. Sumner FRAMThe mast seemed to be 1/16" too short and the gun barrels need to be trimmed thinner to fit in the turrets, and there are no drawings in the instructions (there is a side profile drawing of the ship on the front of the instructions)for the mast assembly above the SPS radar platform.-these are the only two areas that needed any extra attention in this kit. R+Both an SPS-29/37 and SPS-40 radars are provided-I chose to model the SPS-29/37 for a change. The forward part of the photo etched sprayshields that angles in to fit under the upper deck needs to be trimmed about 1/32" to fit properly. Decals for DD-692 through DD-781 are provided. Sorry about the photos-just pick the ones you think are useable......Mike T -------------------------------------------------------------------- Name: california1.jpg california1.jpg Type: JPEG Image (image/jpeg) Encoding: base64 Name: cali2.jpg cali2.jpg Type: JPEG Image (image/jpeg) Encoding: base64 Name: cali3.jpg cali3.jpg Type: JPEG Image (image/jpeg) Encoding: base64 Name: cali4.jpg cali4.jpg Type: JPEG Image (image/jpeg) Encoding: base64 Name: sumner1.jpg sumner1.jpg Type: JPEG Image (image/jpeg) Encoding: base64 Name: sumn2.jpg sumn2.jpg Type: JPEG Image (image/jpeg) Encoding: base64 Name: sumn3.jpg sumn3.jpg Type: JPEG Image (image/jpeg) Encoding: base64