Hey Tim here is another small USCG Cutter ,  USCG point class,  Cutter .   This a small scratch built cutter that  was built from another hull,  This is a sample of a older Port Class pa troll boat that the USCG use un till the newer ones were built , 
    Everthing from the deck up  is scratch built , The crew are HO working members and the zodiac is a 1/72nd scale Die cast hot wheels boat . everything elest is scratch , I use some Parts from my parts box that I have on hand,
      It is about 15 inches long about 3 inches' wide.  It is also RC ,  By using a  small standard servo with a small motor set up and a small servo for the rudder set up ,  standard 2 channel radio ITall  works good ,
   She is Just a  small pool boat or a boat that can be use in a small pond, The hull  is plactic and the deck everything up is wood.
   
     I have another picture in the camera that has the USCG decal that I
still have to get on the net later, Also have some bad news looks like now
we are going to have to hold off on our trip for Diane's hip has gotton
worst so instead of being the road on our dream trip were going to be
recovering  from a full hip replacment ,   O by the way I built that cutter
from pictues from the net and doing my own  scaling .  O by the way I am in
the middle of building an another LST , BUT This one is fully scratch built
from the keel up ,  I will share that one with ya later ,    DON That
Portland Rustbucket 
 http://www.globalsecurity.org/military/systems/ship/images/wpb-82.jpg
 
Don Macdonald
donrcships@earthlink.net
The Portland Rustbucket

 Hello Tim I finely got the decale on the cutter ,  
BY the way did the picture of us we sent work out for ya ?  
Ok now you have ever thing on the cutter when I get some water or 
pond shots of it I will send them your way, BUT For now that LST is driving me nuts , 
But I am all most done with it that is that 1156 class I have been telling you about , 
Catch you later DON have a grate week