Subject: Fwd: FW: Shell Welder
Date: Mon, 7 Jul 2003 17:17:10 EDT
From: Cadman2K@aol.com
To: ship_gallery@modelwarships.com

Timothy Dike
Webmaster and Editor
ModelWarships.com

    ---------------------------------------------------------------------

Subject: FW: Shell Welder
Date: Mon, 7 Jul 2003 13:20:07 -0700
From: "Mucaro, Tory" <MUCAROTO@Mattel.com>
To: "'cadman2k@aol.com'" <cadman2k@aol.com>

Hi Timothy,

As per Jim's suggestion, I'm sending you some pictures of my Shell Welder. I
have several shot's of it from various angles, if you'd like I can send
more.

Thanks for your consideration.

Regards,

Tory


-----Original Message-----
From: James Baumann [mailto:jbys1@tiscali.co.uk]
Sent: Monday, July 07, 2003 3:58 PM
To: Mucaro, Tory
Subject: Re: Shell Welder

VEEEEEEEEEEEEEEEEeeeeeeeeeeeeeeeeeeery nice!!

I was feeling quiete inspired again to have another go at her!!

One big liberty though...... Shell Welder  was a British ship!!!(hence no
stars  and stripes)  She could do with a Big Red Ensign, If you need one
either apply a GMM Union Jack decal onto a pre-coloured red paper and
crinkle... damn, I should practice what I  preach... Now I will have to add
one also....

Loved the no smoking script, where did that come from?

Send the pictures to timothy of www.modelwarships.com  at his picture mail
address  cadman2k@aol.com,

the world need to see this!!

Lovely work

Best wishes

JIM BAUMANN



     ----- Original Message -----
     From: Mucaro, Tory
     To: 'James Baumann'
     Sent: Monday, July 07, 2003 8:48 PM
     Subject: RE: Shell Welder

     Hi Jim,

     I thought you might like to see how my Shell Welder turned out.
     Here are a couple of pictures I took of it. Tried as I did, I
     really couldn't find too much reference on it and wound up using
     the pictures of your model for most of my reference. I took a few
     liberties here and there, but otherwise it should be pretty close
     to yours.

     Funny foot note - The Atlantic photo etched sheet was about 12
     inches short on the railings. And I was VERY conservative using
     them. I wound up having to find something close for the main deck
     railings, although they are admittedly a little small...

     Regards,

     Tory

          -----Original Message-----
          From: James Baumann [mailto:jbys1@tiscali.co.uk]
          Sent: Wednesday, May 28, 2003 8:24 PM
          To: Mucaro, Tory
          Subject: Re: Shell Welder

          Thank yoy forr your kind words!

          The same question was  asked recently on smml(ship
          modellers mailing list), i forget who had the
          answers.... BUT if you tap into their archives of the
          smml homepage
          and enter Shell welder their search-engine ought to
          bring up the goods


          Best of Luck

          JIM BAUMANN

          (if you are not a subscriber follow the instructions on
          the link page of STEEL NAVY website.)

                        Name: shell-welderA.jpg
   shell-welderA.jpg    Type: JPEG Image (image/jpeg)
                    Encoding: base64

                        Name: shell-welderB.jpg
   shell-welderB.jpg    Type: JPEG Image (image/jpeg)
                    Encoding: base64

                        Name: shell-welderC.jpg
   shell-welderC.jpg    Type: JPEG Image (image/jpeg)
                    Encoding: base64

                        Name: shell-welderD.jpg
   shell-welderD.jpg    Type: JPEG Image (image/jpeg)
                    Encoding: base64